Advantage of leashaw

1, 100% fire protection, windbreak, low carbon environmental protection, easy to pass environmental protection environmental protection verification and fire prevention regulations;

2. Strong adhesion, good toughness, corrosion resistance, impact resistance, and no threat and damage from insects, birds and fungi.

3. Excellent weatherability and life span of 10-20 years.

4. Beautiful and elegant color, light weight, rich color, can be matched with a variety of thatch color, the longer the use of color, the more realistic;

5. The construction is quick, flexible and convenient, and is not restricted by the shape of the roof and the requirement of the slope.

6, easy maintenance, no repair and replacement workload after installation.

7, light weight, conducive to structural design;

8, processing performance is good, can be processed into various sizes and shapes to meet the requirements of design.

9, recyclable treatment, environmentally friendly

Two, installation brief:

In doing a good job in the foundation of the roof, thatched tiles from the eaves from the bottom to the top, as with conventional tiling method, each piece of thatched straw tiles horizontal overlap 3 mm, overlap not too much attention, otherwise it will exceed the budget, along the eaves of the thatch suggested thatched line left long overlap many points, the first four rows of the eaves are basically overlapping, highlighting the floating Vertical heavy effect.

Three, installation steps:

The first step is to lay the water proof layer.

According to the structure of your roof frame, lay waterproof cloth on the bottom structure of the keel frame, lay waterproof layer, and then use plastic wood to lay the whole roof.

Effect: from the bottom up, do not see tarpaulin, the best.

The second step is to lay thatched tiles and go up and down.

The thatched grass thatched the eaves must be thicker and overlapped. The first layer is along the reference line to nail the top of the grass hair along the eaves. The second layer retreats 30 mm upward than the first layer, the center line shifts 50 mm to the left (or right), the third layer, and the fourth layer overlaps and staples. The fifth layer retreats 65 mm upward than the fourth layer, the sixth layer deviates from the fifth layer's center line by 50 mm, and the fifth layer retreats 65 mm upward. (Note: In the course of laying, the thatched tile should not be too compact, loose, and the straw line should not appear dead angle in the course of exaggerating. Color distribution is uniform, the eaves of the first row of straw line to leave the longer the better, the second, third, fourth row, each row spacing in 30 mm, the fifth, the sixth row above the beginning, spacing in about 65 mm, stainless steel nails recommended. The 70mm of the top of the roof can be folded. After the roof is finished, the weight of the grass is properly pressed to make it smooth and natural. )

Four. Roof mounting method:

Inclined ridge: first lay the main side of the thatched cottage, and then from the bottom to the top of the ridge to form rain-oriented; ridge closure: the roof thatched tiles paved before doing the ridge closure.

Tip: The angle between the oblique ridge and the right ridge should be pressed against the solid tile of the main surface to adjust the size. The best quantity is 2 or 3 pieces (depending on the width of the ridge).

Five. Installation and finishing work:

After the whole thatched roof is installed, the curvature of the thatched tiles can be properly pressed and selected to make them smooth and natural.

Six. Matters needing attention:

Although the imitation thatch has certain rainproof effect (when overlap is thicker), it is not the main function of rainproof. It is suggested that a professional waterproof layer should be made on the roof before installation.

Installation should not be too tight and not too loose, so as not to affect the overall effect.

The eaves and ridges should be densely installed. The 4-6 rows of the eaves are basically overlapped, with a distance of 1-2cm.

The colors and styles are paved according to the matching plan.

Overall effect: from bottom to top, do not see the base layer of the roof. The effect is the best.

No stampede is allowed after installation.

After installation, there is no need for fire protection and pest control. There is no maintenance and replacement workload.

Safe construction is the duty of every worker.

Manufacturers are not responsible for product quality problems due to construction.

Seven. Tools:

Air pump, nail gun, stainless steel nail, stainless steel row nail and cement nail, etc. Select tools and nails according to needs.